Wireshark Full Version and Portable Version

 

Wireshark is a free and open-source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Originally named Ethereal, the project was renamed Wireshark in May 2006 due to trademark issues.

Wireshark is cross-platform, using the GTK+ widget toolkit in current releases, and Qt in the development version, to implement its user interface, and using pcap to capture packets; it runs on Linux, OS X, BSD, Solaris, some other Unix-like operating systems, and Microsoft Windows. There is also a terminal-based (non-GUI) version called TShark. Wireshark, and the other programs distributed with it such as TShark, are free software, released under the terms of the GNU General Public License.

Wireshark is very similar to tcpdump, but has a graphical front-end, plus some integrated sorting and filtering options.

Wireshark allows the user to put network interface controllers that support promiscuous mode into that mode, in order to see all traffic visible on that interface, not just traffic addressed to one of the interface's configured addresses and broadcast/multicast traffic. However, when capturing with a packet analyzer in promiscuous mode on a port on a network switch, not all of the traffic travelling through the switch will necessarily be sent to the port on which the capture is being done, so capturing in promiscuous mode will not necessarily be sufficient to see all traffic on the network. Port mirroring or various network taps extend capture to any point on the network. Simple passive taps are extremely resistant to tampering[citation needed].

On Linux, BSD, and OS X, with libpcap 1.0.0 or later, Wireshark 1.4 and later can also put wireless network interface controllers into monitor mode.

If a remote machine captures packets and sends the captured packets to a machine running Wireshark using the TZSP protocol or the protocol used by OmniPeek, Wireshark will dissect those packets, thus allowing it to analyze packets captured on a remote machine at the time that they're captured.

Wireshark is software that "understands" the structure (encapsulation) of different networking protocols. It can parse and display the fields, along with their meanings as specified by different networking protocols. Wireshark uses pcap to capture packets, so it can only capture packets on the types of networks that pcap supports.

Data can be captured "from the wire" from a live network connection or read from a file of already-captured packets.

Live data can be read from a number of types of network, including Ethernet, IEEE 802.11, PPP, and loopback.

Captured network data can be browsed via a GUI, or via the terminal (command line) version of the utility, TShark.

Captured files can be programmatically edited or converted via command-line switches to the "editcap" program.

Data display can be refined using a display filter.

Plug-ins can be created for dissecting new protocols.

VoIP calls in the captured traffic can be detected. If encoded in a compatible encoding, the media flow can even be played.

Raw USB traffic can be captured.

Wireless connections can also be filtered as long as they transverse the monitored Ethernet.[clarification needed]

Various settings, timers, and filters can be set that ensure only triggered traffic will appear.[clarification needed]

Wireshark's native network trace file format is the libpcap format supported by libpcap and WinPcap, so it can exchange captured network traces with other applications that use the same format, including tcpdump and CA NetMaster. It can also read captures from other network analyzers, such as snoop, Network General's Sniffer, and Microsoft Network Monitor.

Link Download

Stable Release 1.12.4 for 64bit | 32bit | Portable Version

Development Release 1.99.3 for 64bit | 32bit | Portable Version